In today's era of rapid urbanization, noise pollution has become a hot topic of concern in people's lives. Noise not only disrupts our rest and sleep, causing us to feel agitated mentally, but in severe cases, it can also pose a threat to humans, animals, and buildings.
Although several measures have been taken to address urban noise pollution, to some extent, the noise problem has been alleviated. However, in order to seek a quieter living environment, many citizens are concerned about choosing some effective sound insulation materials to "arm their houses". Windows & Doors will teach you various methods for effective sound insulation.
First: Selection of Windows & Doors
To enhance the sound insulation performance of Windows & Doors, the most crucial factor is the choice of the materials. Generally speaking, if one wants the Windows & Doors to have strong sound insulation capabilities, they should be installed in a double-layer structure. The gap between the double-layer windows should preferably be between 20cm and 30cm, which can achieve the same sound insulation effect as concrete. When strengthening the sound insulation of the windows, the existing windows can be retained and an additional window can be added. This can also achieve the effect of noise isolation. It is recommended to choose to install ordinary plastic-steel windows or soundproof windows, as the effect is very obvious.
Second: Selection of glass
Currently, the main types of glass available on the market include insulating glass, laminated glass, and vacuum glass. Vacuum glass utilizes the principle that sound cannot travel through a vacuum. After installation, it can reduce noise by 30-40 decibels.
Third: Selection of sound insulation strips
The developers mostly use aluminum window frames combined with rubber sound insulation strips or wool sound insulation strips. However, the wool sound insulation strips tend to lose their fibers over time, and the rubber ones become harder and aged due to exposure to wind, sun, and rain. Therefore, the sound insulation strips need to be resistant to aging while maintaining their flexibility. Currently, there is an imported type of sound insulation strip on the market. It is wrapped with leather material on the outside and uses sound-absorbing cotton on the inside. This design not only maintains flexibility but also does not age easily, effectively ensuring the sealing of the sound insulation points of the window frames.
Fourth: Selection of window frames
The selection of window frame materials. Currently, the most commonly used material is aluminum alloy. However, all aluminum alloys are single-chambered and have relatively thin walls, making the sound easily penetrate through them. In contrast, plastic-steel profiles have multiple chambers and thicker walls compared to aluminum alloy. As a result, the sound is less likely to penetrate through the profiles.
Fifth: Install the sealing strip
The installation of the sealing strip has an important prerequisite, which is only for windows with poor sealing performance. Of course, if the sealing performance is poor, the noise will also be very intense. So if the indoor noise is strong, check whether the sealing of the window is intact. If there is a problem, you can choose to install the sealing strip. Moreover, the price of the sealing strip is very cheap. Its function is similar to that of sound insulation cotton. When using the sealing strip, check the width of the gap, and then tightly insert the sealing strip into the gap. In this way, the noise will not be transmitted through the gap.
To ensure a normal daily routine and lifestyle, we must urgently address the issue of noise.
Phone